The StepX aluminum threshold bridge ramp is designed to provide a sloped path across a raised doorway threshold. Its ridged aluminum surface and bridge shape serve a different purpose from a long portable ramp intended to reach a porch or vehicle.
View the StepX threshold ramp, rise options and current details.
What makes a bridge ramp different?
The StepX product images show a raised center with sloping surfaces on both sides. This layout is intended for a threshold that must be crossed from either direction. A single-sided wedge addresses a rise from one side; a longer wheelchair ramp addresses a larger elevation change and needs much more approach space. Confirm the threshold shape and support on both sides before choosing.
The illustrated ramp uses connected aluminum sections. Follow the instructions included with the ordered model for assembly and placement; do not assume every arrangement shown in a product image applies to both size options.
How do you choose between the 2-inch and 3-inch options?
Measure the threshold at its highest point and the available floor space on each side. The product images label the 2-inch model approximately 27 by 29.5 inches and the 3-inch model approximately 37.5 by 29.5 inches. They describe recommended heights below 2 inches and below 3 inches respectively. Confirm the correct model and allowable threshold shape with Living Caring before ordering, especially when a measurement is near a limit.
Also measure the usable doorway width and the width of the mobility device, including hand rims or accessories. Check the door swing, weatherstripping and clearance so the door can operate without striking the ramp.
What should be checked during setup?
Place and secure the assembled ramp only as directed by the supplied instructions. Check that the structure is properly supported, does not rock or shift and does not create a new trip hazard. The listing image states an 800-pound load capacity; verify how that rating applies to the selected model and includes the user, mobility device and any carried items.
The suitable slope depends on the individual, mobility equipment, location and applicable requirements. A named rise option does not establish that a ramp meets accessibility regulations or is suitable for every user. Consult the mobility-device instructions or an accessibility professional when the slope or transfer is uncertain.
Where can the ramp be used?
The product illustrations show a doorway and other low transitions. For each location, check that the floor is firm, the approach is clear and both sides of the threshold can support the ramp as instructed. Keep the ridged surface free of debris, standing water or ice and inspect it regularly; surface texture cannot eliminate the risk of slipping.